Study on sintering of ptfe
From the perspective of the three factors that determine the properties of PTFE products — molecular weight, crystallinity and voidage, the voidage is mainly affected …
Extrusion
Crosshead Extrusion Process (Wire & Cable Coating)
Crosshead extrusion process is widely used to coat wires and cables with a polymer. The basic procedure includes pulling of the wire / cable to …
Overjacketing And Tubing Extrusion
Overjacketing and tubing extrusion are highly preferred processes for extruding a range of plastic materials. The overjacketing extrusion process is discussed here. In the process …
Extrusion Materials – Polymeric Materials
Polymeric materials are widely extruded into various products, using sophisticated extrusion machines such as extruder and others. The finished products are used for consumer as …
Extrusion Reprocessing
The term extrusion reprocessing refers to the minimizing of the scrap generation and recapturing of the material value in most of the operations. In almost all …
Basic Extruder Machine
Every extrusion company has its own variation of plastic extruder, but the basic operation of all the machines remains the same. Firstly, there is the …
Types of Plastic Extrusion Process
The plastic extrusion process is broadly classified into seven different types depending upon the specific applications. (A) SHEET/FILM EXTRUSION In this extrusion process, the molten …
Types of Plastic Extrusion
There are variations to the extrusion process depending upon what type of extrusion is being performed. Here is a look at the different types of …
Types of Hot Melt Extrusion
Hot-melt extrusion (HME) is an established process that has been used since the early 1930s, predominately in the plastics manufacturing … There are two types …
Русский 
English