{"id":75567,"date":"2018-02-02T06:41:33","date_gmt":"2018-02-02T06:41:33","guid":{"rendered":"http:\/\/ptfe-machinery.com\/?p=75567"},"modified":"2018-02-02T06:41:33","modified_gmt":"2018-02-02T06:41:33","slug":"plastic-extrusion-vs-injection-molding","status":"publish","type":"post","link":"https:\/\/ptfe-machinery.com\/ru\/plastic-extrusion-vs-injection-molding\/","title":{"rendered":"Plastic Extrusion vs. Injection Molding"},"content":{"rendered":"

For industrial manufacturers, the methods of injection molding and\/or extrusion<\/strong><\/a> are specified to make products with different shapes and sizes.<\/p>\n

The molten die-casting method is the basis of the injection molding process. The injection-molding unit consists of two elements: the clamping unit, and the injection unit. Unlike extrusion, injection molding forms three-dimensional shapes.<\/p>\n

In terms of plastic extrusion, this technology was pioneered by Thomas Hancock in 1820 and Edwin Chafee in 1836 for the processing of rubber. The first thermoplastic extrusion is credited to Paul and Ashley Troester much later, in 1935. This is a method by which molten plastic or varying alternative materials are pushed continuously, driven by feed screws through a two-dimensional die opening. Following this, it passes through a series of templates or blocks where the molten form retains the desired shape as it cools. In the extrusion process, the finished product has a two-dimensional form which is continuous in length. The extrusion method produces linear shapes which can be cut to multiple lengths and \/ or notched, punched or otherwise fabricated, often continuously in line during the process .<\/p>\n

Both extrusion and injection molding have their own advantages. An advantage in using the extrusion process over other methods is its ability to create complex cross-sections. Additionally, both stiff or soft materials can be formed into any shape and the finished materials have a smooth surface finish when compared to other processes. With both the injection molding and extrusion processes, there is minimal waste as the scrap can be recycled again.<\/p>\n