Since PTFE will not flow above its melting point, it cannot be injection molded and requires special processing techniques. Molded PTFE is processed by first compression molding the powder into preforms, and then sintering the preforms in a process analogous to sintered metal processing. This process creates geometric shapes that can then be machined, fused, and/or welded.
The molding machine is equipped with automatic push-out function (as shown in the picture).
|
|
| PTFE Hydraulic Press Automatic Moulding Machine | |
| Serial/Model NO. | PHM-400T |
| Type | PTFE Press Automatic Moulding Machine |
| Total power KW | 5.2 |
| Press power | Hydraulic station 180 Ton |
| Max Dia Range | 100 mm |
| Max High | 100 mm |
| Operation | Full Automatic / Maunal |
| Control | PLC control with touch Screen in English/ Chinese |
| Controler | Mitsubish PLC |
| Servo Drivers | Hebei Maixin |
| Main Electric Motor KW | 2.2 |
| High press pump KW | 0.75 |
| Powder supply electric motor KW | 0.75 |
| Stepper Motor N | 5 |
| Powder supply tank | stailess steel 25 KG capacity |
| Weight of the Machine KG | 1050 |
| Dimention L*W*H mm | 1300*1250*1900 |
| Voltage/PH/Hz | AC380V 50Hz 3 Phase |
| Floor area of the Machine M2 | 1.2 |
| Capascity per hour piece | 100-150 |
| Full aotumatic operation, powder lack warning,Automatic counting, press setting. | |
| Mobile / WhatsApp: 0086 138 611 80959 | |
| Mail: sammy@sukoptfe.com | |
| PTFE/UHMWPE EXTRUSION MACHINE SOLUTION | |
