Advantages of Our Equipment

1. Tube/rod under 35mm in diameter can be more than one.

2. Automatic Feeder: The difference between our automatic feeder and the market automatic feeder:

2.1 Market automatic feeder, is to manually add material to the hopper, after the use, need to manually add again, no alarm reminder.

2.2 SUKO Fully Automatic Feeder:

2.2.1 Automatic feeding barrel can be used for 6-8 hours with 2 bags of 50kg material, 304 stainless steel;

2.2.2 Vacuum feeding, 316 material, automatically send material to the material tray of the equipment;

2.2.3 The barrel contains a stirring system to prevent the bridge formation of ptfe powder, because the fluidity of ptfe powder is poor and it is easy to bridge clogging;

2.2.4 The height of vacuum feeding can reach 6-8 meters. The feeding barrel is placed on the first floor and directly sucked into the equipment of the platform;

2.2.5 When the material of the barrel is too low, the equipment will automatically alarm to prompt feeding;

2.2.6 The material tray sensor ensures the material storage capacity of the material tray;

2.2.7 Three-color light: green operation, yellow alarm, including lack of material and fault, red stop;

2.2.8 Feeding time and quantity can be controlled separately.

3. Equipment is equipped with water cooling system, hydraulic station water cooling, long time operation will lead to high oil temperature, ensure normal operation. Water cooling system of mould core bar ensures normal use of mould core bar. The tray is cooled with water to ensure the material enters the mold normally.

4. Control cabinet split control, prevent high temperature equipment accelerated components and circuit aging, reduce equipment life and stability.

5. The mould is treated with special technology to prevent corrosion.

6. Multiple proprietary patents for equipment.

7. Provide technical guidance for the whole set of technical solutions, equipment installation and maintenance, mold change, parameter setting, etc

8. Provide complete production line solutions: pre-sintering line, automatic feeding, extrusion, automatic shearing.

9. Automatic pipe cutting machine can be configured, free length setting, automatic cutting, automatic feeding, extrusion and automatic pipe cutting online control, seamless docking. Cutting quantity can be recorded and set.

10. One person can operate 10+ sets of equipment, basically realize automatic unmanned operation.

1. Full automatic: gasket machine, flange gasket machine, shaped parts forming machine, bushing rod forming machine.

1.1 Automatic feeding.

1.2 Automatic demoulding, automatic ejection and ejection.

1.3 PLC program control, touch screen control.

1.4 Pressure mode or position mode can be set.

1.5 Density up to 2.3

1.6 Dimensions can be customized, the outer diameter is less than 300mm and theheight is less than 300mm. Large size can be customized, but the equipment cost is high.

1.7 Each product has the same density and size.

1.8 The output of gasket machine can reach 1200-1500 PCS/hour.

1.9 Gasket machine can be more than one, no flying edge burr, can be shaped special parts.