Teflon raw materials and finished teflon products will be used in the PTFE SINTERING FURNACE, SUKO electric heating furnace can be customized in many styles, including rotary, trolley, insertion tray, orbit, etc.
The sintering furnace is customized according to the characteristics of tetrafluorine products. The sintering furnace can be set at a maximum temperature of 460 degrees, with a uniformity of +/-1 degree and a temperature error of +/-3 degrees.
PTFE sintering furnace inlet and outlet adjustable, wall thickness 150Mm, to ensure that the external temperature does not exceed the room temperature +25 degrees, double sensors to ensure safety, tetrafluoro products sintering is sensitive to temperature requirements and changes, so PTFE sintering furnace and conventional sintering furnace design is completely different, although different sintering furnace can also reach 460 degrees but the control method is different.
 |
 |
Features of electric heating oven.
1. Good insulation performance, uniform temperature in the furnace chamber, sintering curve, fixed time value and temperature value can be set. The working temperature error in the furnace chamber is ±1℃, and there is no error inside. 1000 hours of operation.
2. Using the inner pocket and turntable of the furnace chamber made of stainless steel, they will not rust.
3. The exhaust gas is discharged from the pipeline after purification by activated carbon, which is pollution-free and has good environmental performance. (Customer requirements can be equipped with activated carbon and longer pipeline with fan)
4. Capable of paperless recording and unlimited programming. Its sintering records can last for one year.
5. Multiple sintering ovens can be operated simultaneously.
PTFE sintering furnace installation space requirements.
Leave more than 50cm of space around the oven, need exhaust duct, duct diameter 10-15cm
The oven equipment, good temperature uniformity in the box, accurate temperature control, to meet the vast majority of material preheating, drying, insulation and other requirements. The oven equipment is mainly composed of box frame, hot air circulation system, heating system, electrical control system.
PTFE sintering furnace temperature test method
1. Prepare for the test, such as the line of power or sensor signal source, temperature recorder, etc.
2. Special oven temperature test for tetrafluorine, i.e. full load baking baked goods (with the essence of the difference between the empty box temperature test)
3. Usually, the general industrial oven or oven can be used for dynamic testing, the circuit must be entered from [] directly in front. This method is convenient, but the circuit is very messy. Another method is to use industrial ovens or ovens with test holes, so that the circuit from the test hole into the interior, so that the circuit will be neat and very convenient for dynamic testing.
4. Use a USB flash drive to export test data to the computer, and use software to analyze the technical indicators of the industrial oven.
 |
 |
